For more information on configuring this device, see ifconfig(8). Multiple station interfaces may be operated together with a hostap interface to construct a wireless repeater device. Any number of wds virtual interfaces may be configured together with a hostap interface. Only one hostap or mesh virtual interface may be configured at a time. ral supports station, adhoc, hostap, mesh, wds, and monitor mode operation. The transmit speed is user-selectable or can be adapted automatically by the driver depending on the received signal strength and on the number of hardware transmission retries. MIMO is the basis of the forthcoming IEEE 802.11n standard. This chipset uses the MIMO (multiple-input multiple-output) technology with multiple antennas to extend the operating range of the adapter and to achieve higher throughput. The RT2600 chipset consists of two integrated chips, a RT2661 MAC/BBP and a RT2529 radio transceiver. This chipset provides support for the IEEE 802.11e standard with multiple hardware transmission queues and allows scatter/gather for efficient DMA operations. It consists of two integrated chips, a RT2561 MAC/BBP and a RT2527 radio transceiver. The RT2501 chipset is the second generation of 802.11b/g adapters from Ralink. It consists of two integrated chips, a RT2560 MAC/BBP and a RT2525 radio transceiver. The RT2500 chipset is the first generation of 802.11b/g adapters from Ralink. NAME ral - Ralink Technology IEEE 802.11 wireless network driver SYNOPSIS To compile this driver into the kernel, place the following lines in your kernel configuration file: device device device device deviceĪlternatively, to load the driver as a module at boot time, place the following line in nf(5): if_ral_load="YES" DESCRIPTION The ral driver supports PCI/CardBus wireless adapters based on the Ralink Technology RT2500, RT2501, and RT2600 chipsets.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |